Australian Wheel Clamp
Australian made since 2007.
...fits all size wheels...

Fitting instructions for the Australian Wheel Clamp security option Supreme to
Paramount Caravan Duet.

Published by William Flynn
on July 21, 2015


  or  



Paramount Caravans Duet secured with Australian Wheel Clamp
security option Supreme.

Paramount Caravans Duet secured with Australian Wheel Clamp security option Supreme.

Australian Wheel Clamp
security option Supreme.

Australian Wheel Clamp security option Supreme.

Australian Manufacturer Direct Special Offer

Wednesday March 29, 2017 between 10.30am to 9.30pm

Scroll down this page to read how much you will save.

Note: The Australian made Wheel Clamp has many names depending what it is being sold to secure eg. Australian Wheel Clamp, Caravan Wheel Clamp, Camper Trailer Wheel Clamp, Boat Trailer Wheel Clamp, Trailer Wheel Clamp and others.

Included in this page...

  1. There are two methods to fit the Australian Wheel Clamp security option Supreme to a Paramount Caravan Duet.
  2. How to fit the Australian Wheel Clamp security option Supreme to Paramount Caravans Duet using fitting method one.

1: There are two methods to fit the Australian Wheel Clamp security option Supreme to a Paramount Caravan Duet.

There are two methods to fit the Australian made Wheel Clamp depending on the Vehicle type. The following list is a guide to indicate whether you use fitting method one or two.

  1. Fitting Method One for all towable or drivable vehicles listed below plus any other type of towable Vehicle not listed.
  2. Fitting Method Two used for the vehicles listed below.

Fitting Method One

  • 4WD Off Road Camper Trailer
  • Camper Trailer
  • Caravan
  • Pop Top Caravan
  • Motor Home
  • Boat Trailer
  • Jet Ski Trailer

Fitting Method One

  • Motorbike Trailer
  • Go Kart / Quad Trailer
  • 4WD Vehicle
  • Econovan
  • Ute
  • Flat Top Ute
  • 1 Ton Flat Top Ute

Fitting Method Two

  • Sedan
  • Hatch Back
  • Station Wagon
  • and any other type of driveable Vehicle not listed.

Choose the correct fitting method from the above list of vehicles then download the instructions, in PDF format, from the following list.

Fitting Method One

Fitting Method Two

Note...

Fitting method two can be used to fit any towable or driveable Vehilce listed in fitting method one above but as the manufacturer of the Australian made Wheel Clamp we recommend if your Vehicle type is listed under fitting method one use that method to fit your new Australian Wheel Clamp.

Following is fitting method one...

Back of Wheel
High Tensile Chain wrapped round leaf springs and Wheel.

Back of the vehicle's Wheel showing how the High Tensile Chain wraps round the leaf springs and the Wheel.

Kimberley Kamper back of the Wheel showing how the High Tensile Chain wraps round the chassis.

Kimberley Kamper back of the Wheel showing how the High Tensile Chain wraps round the chassis.

the world's
Highest Security Rated
Australian made Wheel Clamp

Australian Wheel Clamp
security option Supreme.

Australian Wheel Clamp security option Supreme.

Security Rating
Ultimate Protection
STOPS all methods thieves use to cut Chain or break a Padlock. This represents over
99% of all thieves.

...plus...
it is QUICK and simple to fit to and remove from a Wheel.

2: How to fit the Australian Wheel Clamp security option Supreme to Paramount Caravans Duet using fitting method one.

Paramount Caravans Duet secured with Australian Wheel Clamp
security option Supreme.

Paramount Caravans Duet secured with Australian Wheel Clamp security option Supreme.

Step 1
Stand the Steel Shield in front of the Wheel.
Stand the Steel Shield in front of the Wheel.

Step 2
Place the Chain through the two bottom holes in the Steel Shield.
Place the Chain through the two bottom holes in the Steel Shield.

NB: Step 2 - We suggest to save you a few seconds while fitting the Australian Wheel Clamp security option Supreme place a piece of coloured tape or twist a short piece of wire, as seen in the pictures, or similar around the middle link in the length of Chain. This will enable you to quickly centralize the Chain in the center of the Steel Shield.

Step 3
On the left side pass the Chain under then over the vehicle's leaf springs or tubular frame then through the top hole.

On the left side pass the Chain under then over the vehicle's leaf springs or tubular frame (as used to make most Caravan chassis) then through the top hole.

Step 4
Repeat the same procedure on the right side as per Step 2.
Repeat the same procedure on the right side as per Step 3.

Back of Wheel
High Tensile Chain wrapped round leaf springs and Wheel.

Back of the vehicle's Wheel showing how the High Tensile Chain wraps round the leaf springs and the Wheel.

Note...

If your towable or drivable Vehicle has coil springs and/or piston suspension, seen in the following picture, steps 1 and 2 are the same but as there are no leaf springs, seen in the pictures in steps 3 and 4 above, instead you wrap the Chain round any part of the chassis.

Steps 5 and 6 are the same no mater leaf springs or coil springs and/or piston suspension.

Kimberley Kamper back of the Wheel showing how the High Tensile Chain wraps round the chassis.

Kimberley Kamper back of the Wheel showing how the High Tensile Chain wraps round the chassis.

Step 5
Grip both ends of the Chain and pull to make the Chain taut.
Grip both ends of the Chain and pull to make the Chain taut.

Step 6

Locking the Australian Wheel Clamp security option Supreme with the patented Padlock Protection Steel Shroud and customised Padlock - opens in a new window, it will only take a few times to get the hang of it.

Steel Shroud, 10mm diameter High Tensile Chain and customised Padlock partially assembled.

Steel Shroud, 10mm diameter High Tensile Chain and customised Padlock partially assembled.

10mm diameter High Tensile Chain cannot be cut with a Bolt Cutter no matter how long the Bolt Cutter is.

1st: Place both ends of the Chain in the slot on each side of the Steel Shroud.

2nd: Place the removable Shackle in the holes at the top of the Steel Shroud.

3rd: Hold the Steel Shroud in your hand and place a couple of fingers over the top of the Shackle. Look at the opposite end of the Steel Shroud to make sure the Shackle is in the center then insert the Padlock Body in the hole at the bottom of the Steel Shroud. To lock the Padlock turn the key after pushing the Padlock into the Shackle.

Note: The padlock's Shackle only fits into the Padlock body one way, you have to remember the correct way, here's a couple of suggestions:

Simple to fit to a Wheel.
Takes less than a minute to fit.

STOPS
all methods used to break a Padlock and cut Chain.

the world's
Highest Security Rated
Australian made Wheel Clamp

Australian Wheel Clamp
security option Supreme.

Australian Wheel Clamp security option Supreme.

Security Rating
Ultimate Protection
STOPS all methods thieves use to cut Chain or break a Padlock. This represents over
99% of all thieves.

...plus...
it is QUICK and simple to fit to and remove from a Wheel.

Your Paramount Caravan Duet

Is Now Protected

Paramount Caravans Duet secured with Australian Wheel Clamp
security option Supreme.

Paramount Caravans Duet secured with Australian Wheel Clamp security option Supreme.

I trust if you own or are thinking about purchasing a Paramount Caravan Duet you seriously consider purchasing the Australian Wheel Clamp security option Supreme to stop it being stolen.

If you gained knowledge from reading this page
please email this page link to a friend, thank you.

Or...

Share this link
www.wheelclamp.com.au/articles-2015/paramount-caravans-duet-supreme-wheel-clamp-how-to-fit.php
on your favourite social network.

if you have a question or comment about the above article or if you want information about the Australian Wheel Clamp or any of the Theft Proof Security Products below please send us an email.

Article Archive

Do not become a victim of crime. Lock it or risk it being stolen.

Australian Manufacturer Direct Special Offer

Wednesday March 29, 2017 between 10.30am to 9.30pm

save $170 or $188

Plus next business day free delivery anywhere in Australia.

Read our offer Now...

...What To Do Next...

Theft Proof Security Products Web Sites

Below links open in a new window.

Padlock Protection designed to replace a Padlock and Mild Steel Chain.

Padlock Guard designed to protect your Padlock being broken by thieves.

Learn about how High Tensile Chain cannot be cut with a Bolt Cutter, while you are at the site let us give you a quotation.

Hide Away Safe - High Security, Light-Weight, Virtually Indestructible Safe

High Security, Light-Weight
Virtually Indestructible Safe

Caravan Safe showing the four removable insert boxes.

Hide Away Safe showing Docking Station and four removable insert boxes.

Data Security Safe will secure up to 52 CD's or DVD's or up to six 2.5 inch external hard drives.

Handgun Safe with Foldback Handle securing two handguns.

Laptop being placed inside the Laptop Safe.

Easy DIY Installation in:
Residential Homes, Vehicles
Caravans, Motor Homes, RV’s, Offices, Factories and Boats.

If you don't need any more information to make a decision to purchase the world's highest security rated Australian made Wheel Clamp then

Site Map


  or  



Copyright © 1994 – 2017
Speculator Holdings Pty Ltd

Last Updated
Wednesday March 29, 2017